Connecting Mg 1000T System Components; Contents; Introduction - Nortel 1000E Installation And Configuration Manual

Connecting MG 1000T system
components

Contents

Introduction

This section contains information on the following topics:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting an MG 1000T Core to a Survivable MG 1000T Expansion 156
Connecting an MG 1000T Core to the ELAN subnet. . . . . . . . . . . . . .
Connecting a Signaling Server to the ELAN subnet. . . . . . . . . . . . . . .
Connecting a Signaling Server to the TLAN subnet. . . . . . . . . . . . . . .
Inserting a Shielded 50-pin to Serial/ELAN/TLAN adapter onto a
Media Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting a Media Card to the ELAN . . . . . . . . . . . . . . . . . . . . . . . .
Connecting a Media Card to the TLAN subnet. . . . . . . . . . . . . . . . . . .
Connecting a Media Gateway to a Media Gateway Expansion . . . . . .
Several system connections are required to make the MG 1000T operational.
The MG 1000T must be connected to the CS 1000E through the TLAN
subnet. The MG 1000T Core is directly connected with a CAT5 cross-over
cable to each of the MG 1000T Expansions. The Media Gateway is directly
connected to the Media Gateway Expander. The system's components, such
Communication Server 1000E
Page 153 of 488
Installation and Configuration
153
161
162
163
163
165
166
166