Chapter 13 Replacing The D/480Jct-2T1 T1 Interface Card; Td/480Jct-2T1 Card Function - Nortel CallPilot User Manual

Chapter 13
Replacing the D/480JCT-2T1 T1
interface card
In this chapter
"TD/480JCT-2T1 card function" (page 135)
"Replacing the D/480JCT-2T1 card" (page 135)

TD/480JCT-2T1 card function

A selection of one to four D/480JCT-2T1 T1 interface cards can be
configured to match the number of voice channels connecting to the switch.
Each T1 interface card occupies one PCI slot.
The Intel D/480JCT-2T1 card carries the media stream and call control
signals between CallPilot and SL-100* or DMS-100. The card connects to
the MPB96 board with a CTbus cable.
Replacing the D/480JCT-2T1 card
If you determine that a problem exists with your card, replace it. You must
identify the type of card before you can decide where to install it.
Requirements
To replace the card, you require the following:
•
•
•
Identify the card
Identify the card from other types of cards by its connector.
Copyright © 2007, Nortel Networks
.
one Phillips screwdriver
one antistatic wrist strap
the replacement card
Nortel CallPilot
1002rp Server Maintenance and Diagnostics
NN44200-701 01.02 Standard
5.0 4 April 2007
135
Nortel Networks Confidential