Hollow Shaft With Shrink Disk; Mounting The Hollow Shaft With Shrink Disk - Siemens SINAMICS G115D Operating Instructions Manual

Gearbox
K, F, C
C
K, F
K, F, C
C
11.3.15

Hollow shaft with shrink disk

11.3.15.1

Mounting the hollow shaft with shrink disk

a
b
*
①
②
③
Figure 11-20 Mounting the hollow shaft with shrink disk
Procedure
1. Using benzine or a solvent, remove the anti-corrosion protection from the shaft ends and
flanges.
2. Check the seats or edges of the hollow and machine shafts for damage. Contact Technical
Support if you notice any damage.
3. Mount the gearbox with the shrink disk shaft onto the machine shaft. Carefully ensure the
correct position and that the shrink disk seat completely covers the machine shaft.
You have mounted the hollow shaft with shrink disk.
SINAMICS G115D distributed drive
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
Size Hollow
shaft ∅
[mm]
69 40
45
79 40
89 50
60
Greased
Absolutely grease-free
Not included in scope of supply
Machine shaft
Hollow shaft
Bushing
Additional information on the SIMOGEAR geared motor
b10 b11 b12 d10
[mm] [mm] [mm] [mm]
6 20 9 39.9
6 20 9 44.9
6 20 9 39.9
7 20 10 49.9
7 20 10 59.9
11.3 Specific data gearbox
d11 s11 t u
max
[mm] [mm] [mm] [mm]
28 M16 43 12
36 M16 48 14
28 M16 43 12
36 M16 53.5 14
45 M20 64 18
419