Siemens SINAMICS G115D Operating Instructions Manual page 42

Mounting
3.2 Mounting the G115D Wall Mounted drive
Drill patterns
Frame
size
FSA
FSB
Mounting the motor
The SINAMICS G115D wall-mounted converter supports SIMOGEAR geared motors, SIMOTICS
motors, or third-party motors.
For detailed information on installation of a SIMOGEAR geared motor, refer to the following
documentation:
• The relevant chapter in this manual
• The relevant catalog
40
Drilling dimensions - mm (in)
C1 C2
145 (5.7) 364.5 (14.4)
168 (6.6) 410 (16.1)
Additional information on the SIMOGEAR geared motor (Page 353)
Catalog D 31.2 (https://support.industry.siemens.com/cs/ww/en/view/109750324)
Catalog D 50.1 (https://support.industry.siemens.com/cs/ww/en/view/109746934)
Fixings
Ø
5.5 (0.2) 4 × M5 bolts,
washers, nuts
5.5 (0.2)
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
Tightening
torque
3.5 Nm
(31.0 lbf.in)
SINAMICS G115D distributed drive