Siemens SINAMICS G115D Operating Instructions Manual page 281

Selecting the number of drive data sets
Parameter p0180 defines the number of drive data sets (1 ... 4).
Parameter
p0010 = 0
p0010 = 15
p0180
Copying the drive data sets
Parameter
p0819[0]
p0819[1]
p0819[2] = 1
Parameters
Parameter
p0010
r0051.0...1
p0180
p0819[0...2]
SINAMICS G115D distributed drive
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
Description
Drive commissioning parameter
filter
CO/BO: Drive data set DDS effec-
tive
Number of Drive data set (DDS)
Copy drive data set DDS
Advanced commissioning
6.27 Switchover between different settings
Description
Drive commissioning: Ready
Drive commissioning: Data sets
Drive data set (DDS) number
Description
Source drive data set
Target drive data set
Starts the copy operation
Setting
Sets the parameter filter to commission a drive.
0: Ready
1: Quick commissioning (factory setting)
15: Data sets
Displays the effective Drive Data Set (DDS).
p0180 = 1, 2, 3 or 4
Factory setting: 1
[0] Source Drive Data Set
[1] Target Drive Data Set
[2] 0→1: Starts the copy operation
Factory setting: 0
279