Resetting The Safety Functions To The Factory Settings - Siemens SINAMICS G115D Operating Instructions Manual

Distributed drive

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

3. For the G115D wall-mounted converter, select the menu option as follows to restore to the

factory settings:

For the G115D motor-mounted converter, select the menu option as follows to restore to

the delivery condition:

4. Click on the

5. Wait until the converter has been reset to the factory settings/delivery condition.

You have reset the converter to the factory settings/delivery condition.

Resetting the safety functions to the factory settings

Procedure with Startdrive

1. Go online with the converter.

2. Select the command as follows from the project tree:

SINAMICS G115D distributed drive

Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B

Commissioning

5.6 Restoring the factory settings