Preparing The Memory Card; Upgrading The Firmware - Siemens SINAMICS G115D Operating Instructions Manual

9.4.1

Preparing the memory card

Overview
You can load the converter firmware from the Internet to a memory card.
Precondition
You have the appropriate memory card.
Procedure
1. Download the required firmware to your PC from the Internet.
2. Extract the files to a directory of your choice on your PC.
3. Transfer the unzipped files into the root directory of the memory card.
Depending on the firmware, the filenames and the number of files may differ from the
display above.
The "USER" directory does not exist on unused memory cards. After the memory card is
plugged in for the first time, the converter creates a new "USER" directory.
You have prepared the memory card for the firmware upgrade or downgrade.
❒
9.4.2

Upgrading the firmware

Overview
When upgrading the firmware, you replace the converter firmware with a newer version.
SINAMICS G115D distributed drive
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
Memory cards (Page 281)
Download (https://support.industry.siemens.com/cs/ww/en/view/67364620)
Corrective maintenance
9.4 Firmware upgrade and downgrade
323