Siemens SINAMICS G115D Operating Instructions Manual page 39

Mounting dimensions
All dimensions are specified in millimeters (inches).
Converter
frame size
FSA
FSB
The glanded variant of the converter provides no cable gland when delivered. The dimension data
1)
of the cable glands is not provided here.
Mounting clearance
Maintain a minimum clearance distance of 150 mm (5.9 in) from the converter to the wall.
For mounting clearance distance around the motor, refer to the following chapter:
SINAMICS G115D distributed drive
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
Motor Length (L)
frame size
71 240 (9.4)
80
90
90 285 (11.2)
100
112
Installation conditions for the motor (Page 376)
3.1 Mounting the G115D Motor Mounted drive
Length (l1) Width (W) Height (SH)
53.5 (2.11) 146 (5.7)
25 (0.98)
0.5 (0.02)
27 (1.06) 180 (7.1)
5 (0.2)
-3 (-0.12)
Mounting
Additional width
(C)
1)
177.5 (7.0) Connector variant:
+47.5 (1.87)
196 (7.7)
201 (7.9)
206 (8.1)
217.5 (8.6)
228.5 (9.0)
37