Configuring A Safety Function - Siemens SINAMICS G115D Operating Instructions Manual

You can obtain more information or learn about alternative procedures from Technical
Support.
Parameters
Parameter
p9761
p9762
p9763
6.13.2.3

Configuring a safety function

Overview
To ensure protection against unauthorized changes, it is recommended that you configure
the safety function settings.
Function description
Procedure
1. Select "Select safety functionality".
2. Select "Basic Functions".
SINAMICS G115D distributed drive
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
Description
SI password input
SI password new
SI password acknowledgment
Advanced commissioning
6.13 Safe Torque Off (STO) safety function
Setting
Enters the Safety Integrated password.
0: No password set (factory setting)
1 ... FFFF FFFF: Password is set
Enters a new Safety Integrated password.
Acknowledges the new Safety Integrated pass-
word.
191