Use As Prescribed - Siemens SINAMICS G115D Operating Instructions Manual

If you have any technical questions contact Technical Support
(https://support.industry.siemens.com/cs/ww/en/sc/2090).
Europe and Africa
Telephone: +49 (0) 911 895 7222
support.automation@siemens.com
America
Telephone: +1 800 333 7421
support.america.automation@siemens.com
Asia / Australia / Pacific
Telephone: +86 400 810 4288
support.asia.automation@siemens.com
Valid operating instructions for SIMOGEAR
• BA 2030 - operating instructions for SIMOGEAR gearboxes
• BA 2031 - operating instructions for permissible mounting position deviations of
SIMOGEAR gearboxes
• BA 2330 - operating instructions for LA/LE/LES motors for mounting on SIMOGEAR
gearboxes
• BA 2535 - operating instructions for SIMOGEAR electric-monorail-gearboxes
• BA 2730 - Operating Instructions for SIMOGEAR geared motors with encoder for safety-
relevant applications
See also
Once Delivered (https://c0p.siemens.com:8443/sie/1nce_delivered)
11.2.2

Use as prescribed

The motors described in these operating instructions have been designed for stationary use in
general engineering applications.
They comply with the harmonized standards of the series EN 60034 (VDE 0530). They are not
approved for operation in hazardous zones and areas.
Unless otherwise agreed, the motors have been designed for use in plants and equipment in
industrial environments.
The motors have been built using state-of-the-art technology and are shipped in an
operationally reliable condition. Changes made by users could affect this operational
reliability and are forbidden.
Note
The data on the rating plate assumes an installation altitude of up to 1 000 m above sea level.
The permissible ambient temperature is stamped on the rating plate.
In the case of other ambient temperatures and installation altitudes, contact Technical
Support.
SINAMICS G115D distributed drive
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
Additional information on the SIMOGEAR geared motor
11.2 Specific data motor
373