Siemens SINAMICS G115D Operating Instructions Manual page 282

Advanced commissioning
6.27 Switchover between different settings
Parameter
p0820[0...n]
p0821[0...n]
p0826[0...n]
Further information
The converter switches the motor data set (MDS) and the power unit data set (PDS) together
with the drive data set (DDS).
280
Description
BI: Drive data set DDS selection,
bit 0
BI: Drive data set DDS selection,
bit 1
Motor changeover, motor number Sets the freely assignable motor number for the
Setting
Sets the signal source to select DDS, bit 0.
Factory setting: 0
Sets the signal source to select DDS, bit 1.
Factory setting: 0
drive data set changeover.
Factory setting: 0
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
SINAMICS G115D distributed drive