Fastening For Suspended Transport; Storage; General Information For Storage - Siemens SINAMICS G115D Operating Instructions Manual

Additional information on the SIMOGEAR geared motor
11.3 Specific data gearbox
11.3.6

Fastening for suspended transport

Inadequately secured gearbox or geared motors can free themselves
Use only the transport eye or eyebolt of the gearbox to transport the gearbox or geared
motor. Because they are designed only for the weight of the gearbox or geared motor, it is
not permissible to add additional loads.
Do not rig eyebolts to the front threads at the shaft ends for transportation purposes.
Do not use the integrally cast lifting eyes on the motor for transport because of the risk of
breaking.
If necessary, use additional, suitable lifting accessories for transport or during installation.
When attaching by a number of chains and ropes just two strands must be sufficient to bear
the entire load. Secure lifting accessories against slipping.
Table 11- 31 Maximum load of the eyebolt on the gearbox
Thread size
M8
M10
M12
M16
The eyebolt corresponds to DIN 580.
11.3.7

Storage

11.3.7.1

General information for storage

Danger of serious injuries caused by falling objects
Danger of damage to the gearbox when stacked
Do not stack gearboxes or geared motors on each other.
NOTICE
Failure of the external protection
Mechanical damage, chemical damage and thermal damage, such as scratches, acids,
alkalis, sparks, welding beads and heat cause corrosion.
Do not damage the paint finish.
408
WARNING
m
[kg]
140
230
340
700
WARNING
d Thread size
3
[mm]
36 M20
45 M24
54 M30
63 -
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
m d
3
[kg] [mm]
1 200 72
1 800 90
3 200 108
- -
SINAMICS G115D distributed drive