Siemens SINAMICS G115D Operating Instructions Manual page 174

Distributed drive

Hide thumbs Also See for SINAMICS G115D:

Table of Contents

Advanced commissioning

6.8 Conveyor technology control functions

The motor will have the following behavior with the end position shutdown (p3392 = 1) and

level-triggered sensor signals (p3394 = 1 or 2) activated:

• Once a stop sensor at the positive or negative position is triggered, the motor stops even if

the level is canceled.

• Once a stop sensor at the center position is triggered, the motor stops; if the level is

cancelled, then the motor runs again.

You can commission the conveyor technology functions via the Startdrive PC tool.

Conveyor technology control parameters (Page 175)

Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B

SINAMICS G115D distributed drive