Siemens SINAMICS G115D Operating Instructions Manual page 406

Additional information on the SIMOGEAR geared motor
11.3 Specific data gearbox
These operating instructions apply to the standard version of SIMOGEAR gearboxes:
• Helical gearboxes E, D and Z, frame sizes 19 to 89
• Parallel shaft gearboxes FD / FZ, frame sizes 29 to 89
• Bevel gearboxes B, K, frame sizes 19 to 89
• Helical worm gearboxes C, frame sizes 29 to 89
For a description of the precise designation see Gearbox type designation (Page 366).
Table 11- 29 Article number code
SIMOGEAR gearbox
Helical gearbox E
Helical gearbox D
Helical gearbox Z
Parallel shaft gearbox FD
Parallel shaft gearbox FZ
Bevel gearbox B, K
Helical worm gearbox C
Note
In addition to these operating instructions, special contractual agreements and technical
documentation apply to a special gearbox design and the associated supplementary
equipment.
Please refer to the other operating instructions supplied with the product.
The described gearboxes correspond to the state-of-the-art at the time these operating
instructions were printed.
Siemens AG reserves the right to change individual components and accessory parts in the
interest of further development. The changes are designed to improve performance and
safety. The significant features are retained. The operating instructions are updated regularly
with new contents.
The latest versions of the operating instructions, the declaration of incorporation and the
declarations of conformity are available in electronic form in the Industry Online Support
(https://support.industry.siemens.com/cs/ww/en/ps/13424/man).
You can find the contact data of your Technical Support in the Database of contacts at
Siemens AG (www.siemens.com/yourcontact).
If you have any technical questions, please contact Technical Support
(https://support.industry.siemens.com/cs/ww/en/sc/2090).
Europe and Africa
Telephone: +49 (0) 911 895 7222
support.automation@siemens.com
404
Article number position
1 2 3
2 K J
2 K J
2 K J
2 K J
2 K J
2 K J
2 K J
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
4 5
8 0
8 2
8 1
8 4
8 3
8 5
8 6
SINAMICS G115D distributed drive