Particular Types Of Hazards - Siemens SINAMICS G115D Operating Instructions Manual

11.1.4

Particular types of hazards

Extreme surface temperatures
Hot surfaces over +55 °C pose a burn risk.
Cold surfaces below 0 °C pose a risk of damage due to freezing.
Do not touch the gearbox without protection.
Hot, escaping oil
Before starting any work wait until the oil has cooled down to below +30 °C.
Poisonous vapors when working with solvents
Avoid breathing in vapors when working with solvents.
Ensure adequate ventilation.
Risk of explosion when working with solvents
Ensure adequate ventilation.
Do not smoke!
Risk of eye injury
Rotating parts can throw off small foreign particles such as sand or dust.
Wear protective eyewear!
In addition to the prescribed personal protection gear, also wear suitable protective gloves
and safety glasses.
SINAMICS G115D distributed drive
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
WARNING
WARNING
WARNING
WARNING
WARNING
Additional information on the SIMOGEAR geared motor
11.1 General information geared motor
355