Siemens SINAMICS G115D Operating Instructions Manual page 56

Wiring
4.7 Overview of the converter interfaces
Motor-mounted converter
The figure below shows an example of the motor-mounted converter with plug-in sockets:
①
②
③
④
⑤
⑥
⑦
Note
The electromechanical potentiometers and the repair switch on the converter do not provide
protection against unauthorized access. You must take appropriate measures to protect the
converter against unauthorized operation or changes to the settings.
54
Digital inputs DI 0 and DI 1 - X07
Digital inputs DI 2 and DI 3 - X08
Memory card interface
Bidirectional digital inputs/outputs DIO 24
and DIO 25 - X05
External braking resistor interface - X4
(reserved)
24 V DC power supply interface (OUT) - X02
24 V DC power supply interface (IN) - X01
⑧ PROFINET interfaces - X150 P1 and P2
⑨ Line supply interface (OUT) - X3
⑩ Line supply interface (IN) - X1
⑪ Fan unit connector (reserved)
⑫ Status LED
⑬ Commissioning interface, including a mini-
USB interface and two electromechanical
potentiometers P1/P2
Protective earth on the converter housing
Operating Instructions, 09/2020, FW V4.7 SP13, A5E48681219B
SINAMICS G115D distributed drive