Interlogix ATSx500A Series Installation And Programming Manual page 276

Chapter 5: Menu reference
One of the following dial tone options can be selected:
• None
• Default (CTR21)
• UK
• Other (Netherlands)
9.3.n.6 Dialing
6 Dialing
>DTMF<
The Dialling menu allows you to select the PSTN dial mode: pulse or tone
(DTMF).
ISDN specific options
9.3.n.6 Point to Point
6 Point to Point
>No<
The option must be set to Yes if the ISDN dialler uses point-to-point connection,
otherwise it should be set to No.
Contact your ISDN provider for details on the service.
9.3.n.7 MSN
7 MSN
The MSN option lets you enter the ISDN MSN number.
IP specific options
9.3.n.3 Transm path
3 Transm path
ETHERNET
The Transmission path option is a read-only field that identifies a communication
method used for this transmission path.
9.3.n.4 IP config
1>IP config
Dynamic
The IP config menu allows you to configure the panel IP address.
The following options are configurable in this menu.
270 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual