Interlogix ATSx500A Series Installation And Programming Manual page 155

• AG symbolic: The same as symbolic, but for area groups.
See Advisor Advanced User Guide for more information on area selection.
2.2.1.n.3.16 LCD backlight
16 Status ind.
>Always on<
LCD backlight option defines when the keypad display backlight is lit. There are
the following options available:
• Always on: LCD backlight never switches off.
• Normal: LCD backlight switches off after the particular idle time.
• Excl. entry: LCD backlight is off during the entry time, until a key is pressed.
Note: The backlight timeout depends on the particular keypad firmware.
2.2.1.n.3.17 ACK on keypad
1>Rkp 1
2 Rkp 2
The ACK on keypad option allows you to select an additional LCD keypad that
displays an acknowledgement prompt after the system is unset using the
selected non-LCD keypad or reader.
Note: This option is only available for non-LCD keypads and card readers.
See also "4.1.n.6.26 ACK on keypad" on page 178 for more details.
2.2.1.n.3.18 EE 1 buzzer
18 EE 1 buzzer
>Yes<
If the option is set to Yes, the buzzer of the selected keypad is active during
entry/exit time 1.
See "2. Entry/Exit 1" on page 45 for more details.
2.2.1.n.3.19 EE 2 buzzer
19 EE 2 buzzer
>Yes<
If the option is set to Yes, the buzzer of the selected keypad is active during
entry/exit time 2.
See "18. Entry/Exit 2" on page 47 for more details.
2.2.1.n.3.20 1+3 keys
20 1+3 keys
>Yes<
If the option is set to Yes, the combination of 1 and 3 keys allows you to raise a
panic alarm.
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Chapter 5: Menu reference
149