Interlogix ATSx500A Series Installation And Programming Manual page 177

4 Zones and areas
1>Zone menu
2 Areas
In the Zones and Areas programming section all zone, fob, and area parameters
are programmed.
4.1 Zone menu
0>Add zone
1 Zone 1
This menu lets you see all programmed zones, select an existing zone, or create
a new one.
Each zone can be a physical input on the control panel, an expander, or a plug-in
expander, or a wireless device programmed in the wireless expander.
Zone options
4.1.0 Add zone
0>Zone
1 Panel
Use the Add zone menu to add a new zone. When adding a zone, select one of
the following options:
• 0 Zone: Add a zone assigned to the specific system input.
• 1 Panel: Add a zone assigned to the specific panel input.
• 2 Panel exp.: Add a zone assigned to the specific panel expander input.
• 3 Exp.: Add a zone assigned to the specific expander input. Select an
expander first, and then select an input.
• 4 Auto-detect: Add a zone assigned to the first unused system input.
See "Zone, output, and door addressing" on page 31 for available zone
addresses.
If the chosen zone already exists, a warning is displayed.
If the zone is created successfully, you are moved to the menu "4.1.n.1 Zone
name".
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Chapter 5: Menu reference
171