Interlogix ATSx500A Series Installation And Programming Manual page 256

Chapter 5: Menu reference
8.7.2 Panel language
2 Panel language
>ENGLISH UK<
The Panel language menu lets you change the panel language.
Caution: Changes of the following authorization options will cause deleting of all
user PINs, and setting default PINs of two predefined users. See also "Initial
start-up" on page 114, and "Predefined users" on page 60.
8.7.3 Duress method
3 Duress method
>Disabled<
The Duress method menu allows you to change the duress entering method.
See Advisor Advanced User Guide for more information on available duress
methods.
8.7.4 PIN length
4 PIN length
> <
The PIN length menu allows you to change the PIN length. See "3.1.n.2.1
Change PIN" on page 163 for more information about PINs.
Caution: If PIN length is changed when remote PIN is set, the configuration
software will not be able to connect the panel with the programmed data
anymore. See "3.1.n.2.2 Remote PIN" on page 163 for details.
8.7.5 PIN chg mode
5 PIN chg mode
>Custom<
The PIN change mode option allows you to choose the appropriate PIN change
mode. See "3.1.n.2.1 Change PIN" on page 163 for more details.
8.7.6 Alarm confirm
6>AB mode
>>>
The Alarm confirm menu allows you to set a various options connected to the
alarm verification.
8.7.6.1 AB mode
1>Area 1
Off
The AB mode option enables the AB alarm confirmation feature for particular
areas. When set to On, the first alarm is reported as a standard burglar alarm (A-
250 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual