Interlogix ATSx500A Series Installation And Programming Manual page 191

The following options may be available.
Table 27: Wireless sensor options
Option
Reed and contact
Contact
Reed and shock
Shock sensor
Reed
Notice tamper
Ignore tamper
4.1.n.7.6 Remove RF dev
Remove RF dev?
>Cancel<
Select Ok and press Enter to remove the wireless device from the wireless
expander database.
4.2 Areas
1>Area 1
2 Area 2
The Area menu allows you to configure areas and area groups.
See "Areas" on page 50 in Chapter 3 "System functions" for details.
Each area can be programmed with a number of options, like the area name,
entry and exit times etc. Before going any further, select the area to program.
Area options
4.2.n Select area
1>Area name
Area 1
Select an area to program.
4.2.n.1 Area name
1 Area name
>Area 1 <
Every area can be programmed with a name to identify the area.
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Sensor type
Door/window sensor
Door/window sensor
Shock sensor
Shock sensor
Door/window sensor,
shock sensor
Smoke sensor
Smoke sensor
Description
Report alarms from both sources
Ignore reed alarms
Report alarms from both sources
Ignore reed alarms
Only report reed alarms
Control housing tamper alarms
Ignore housing tamper alarms
Chapter 5: Menu reference
185