Interlogix ATSx500A Series Installation And Programming Manual page 71

# Option
8. User adding
9. Forced set
10. Change PIN
11. Walk test
12. Engineer reset
13. Duress code
14. Reporting tests
15. Remote connection
16. Cleaner
17. User group area list
18. Menu access
19. Inst. access
20. Logs access
21. Stop report
22. SMS reporting
23. SMS control
24. Card and PIN mode Set the mode for this particular user group (if possible). The
25. No OP/CL reports
26. Schedule access
27. Fob learning
28. Remote pics
29. Pic deletion
30. CS configuration
31. Shunt
32. Door control
33. Region ctrl
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Description
Create new users (see also "User privilege limitation" on page 64).
Perform a forced set.
The availability of this option depends on the system configuration.
Change own PIN.
Perform a walk test.
Perform an engineer reset.
Use a duress code.
Make a test call to the particular central station.
Respond to a remote access request.
Leave zones inhibited after the unset.
Display the list of areas.
Enter the user menu.
Grant the Installer an access to the system configuration.
Access the panel logs.
Stop reporting in progress.
Receive SMS reports.
Control the system via SMS.
following modes are available:
• PIN only
• Card only
• Card or PIN
Open/close events generated by users of the user group are not
reported
Access to schedule. The following options are available:
• None: No access
• View: Restricted access. Users can view schedule and cancel
actions for the present day.
• Configure: Full access.
Program a fob.
Enable remote picture triggering.
Delete pictures.
Configure CS communication.
Shunt zones.
Control door state: lock, unlock, open, timed open, enable and
disable.
Move users between regions.
Chapter 3: System functions
65