Confirmation Of Changes; Exit From Menu - Interlogix ATSx500A Series Installation And Programming Manual

How to edit a host address
Host name
> <
Using the same rules as described in "How to edit text" on page 110, enter one of
the following:
• An IP address as nnn.nnn.nnn.nnn. For example, 192.168.1.20.
• A host name as a text string. For example, "utc.com". In this case DNS server
must be configured in "9.3.n.5 DNS config" on page 271, and must be
available.

Confirmation of changes

If particular settings are changed, you are prompted to confirm those changes
when you exit from the current menu. The following screen appears:
Apply settings?
>No<
Changing of other settings that affect user configuration, like PIN length, Duress
method, etc., requires all user database reset. In this case you are prompted to
confirm all user removal.
Reset users?
>No<
If you want to keep the changes, choose "Yes" and press Enter, otherwise the
changes are cancelled.

Exit from menu

You must confirm your decision to exit from the menu system. The appropriate
prompt appears. Choose "Yes" and press Enter to exit from the menu.
Goodbye?
>No<
Alternatively, choose "Engineer mode". In this case the panel remains in the
service in mode, while the installer logs off the keypad. It lets the installer to log
in another keypad without leaving the programming mode.
If any faults or any open inputs are present, they are listed the same way as in
the menu "1.2.4 Panel status" on page 126.
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Chapter 4: Programming
111