Interlogix ATSx500A Series Installation And Programming Manual page 185

Table 25: Sensor types and reported events
Sensor Code
Type
Low temp. SIA
CID
Gas SIA
CID
High temp. SIA
CID
Water SIA
CID
Fire SIA
CID
Generic SIA
CID
See also Appendix B "Advisor Advanced reporting codes" on page 327.
4.1.n.6.29 Virtual zone
1>Outputs
2 Rkp
The menu allows mapping the selected zone to an existing output or a keypad.
If an output or a keypad is not set, the zone state follows the state of the physical
input assigned.
• If an output is selected, the zone becomes a virtual zone that is active when
the selected output is active. In this case the physical input has no effect on
the zone.
• If a keypad is selected, the zone becomes a virtual zone, which is active
when the selected keypad has request to exit state (RTE) active.
See also "Outputs" on page 67.
4.1.n.6.30 Held open
30 Held open
>No<
The menu defines if this zone raises a "zone open too long" alarm while held
open longer than for a defined period.
The held open period is defined in "8.1.4.6 Held open time" on page 236.
Note: If the option is active, the option "4.1.n.6.5 Double knock" on page 174 is
not available.
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Alarm Alarm
restore
ZA ZR
E152 R152
GA GR
E151 R151
KA KR
E158 R158
WA WR
E154 R154
FA FR
E110 R110
UA UR
E150 R150
Bypass Unby-
pass
ZB ZU
E570 R570
GB GU
E570 R570
KB KU
E570 R570
WB WU
E570 R570
FB FU
E570 R570
UB UU
E570 R570
Chapter 5: Menu reference
Super- Super-
vision vision
long restore
ZS ZJ
E381 R381
GS GJ
E381 R381
KS KJ
E381 R381
WS WJ
E381 R381
FT FJ
E373 R373
ZS ZJ
E381 R381
179