Interlogix ATSx500A Series Installation And Programming Manual page 199

4.4.n.4.2 Remove RF dev
Remove RF dev?
>Cancel<
Select Ok and press Enter to remove the wireless device from the wireless
expander database.
4.4.n.5 Remove fob
Remove fob?
>Cancel<
Use the Remove fob command to remove the fob from the system. Select Ok
and press Enter. The fob is deleted both from the panel and the wireless
expander database.
4.5 Cameras
17>Camera 17
18 Camera 18
The menu allows you to configure camera modules in wireless PIR cameras.
For more details on cameras, see also "Using cameras" on page 98.
4.5.n Select camera
1>Camera name
Camera 17
Select an appropriate camera to configure.
4.5.n.1 Camera name
1 Camera name
>Camera 17 <
Enter camera name.
4.5.n.2 Pics by zone
1>Zone 17
2 Zone 2
Choose 1 to 4 zones that can trigger the camera when active.
By default, the first zone assigned is the zone with PIR detector of this wireless
PIR camera.
Choose a zone position to assign a zone, or an existing zone to remove it from
the associated zone list.
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Chapter 5: Menu reference
193