Autoset
The Advisor Advanced system allows autoset configuration. The system can be
set automatically via schedule.
The following options must be considered when providing an autoset facility.
•
Using menu "7 Calendar" on page 225, create an action with Set function.
See also "User programmable functions" on page 88.
•
Configure an appropriate schedule using the menu "7.2 Schedules" on page
226.
•
Enable or disable "4.2.n.5.3 Silent autoset" option on page 188.
•
If necessary, set "4.2.n.5.2 Set retry" option on page 188.
If Set retry is allowed, configure "8.4.8 AS user retry" on page 245.
•
Set "4.2.n.4.1 Warning time" option on page 187 as well.
•
Optionally, configure "8.4.7 AS fault retry" option on page 245.
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Chapter 3: System functions
91