Interlogix ATSx500A Series Installation And Programming Manual page 146

Chapter 5: Menu reference
1.3.4 USB upgrade
Allows you to write or read the panel firmware or configuration using USB flash
drive.
1.3.4.1 FW Upgrade
Allows you to upgrade the panel firmware or configuration with selected file from
the USB flash drive.
1.3.4.2 FW Upload
Allows you to read the panel firmware or configuration, and store it as .dfu file on
the USB flash drive.
1.4 Bypass panel lid
1>Panel lid time
01'00
The Bypass panel lid option lets you connect a PC without initiating the panel
tamper alarm. The following menus allow setting the isolating timer and running
the connection process.
To connect a USB cable to the panel:
1. Ensure the "1.4.1 Panel lid time" value is enough for you to come to the
panel, open the housing, and connect the USB cable.
2. Bypass panel lid using menu "1.4.2 Restore lid" below.
3. Open the panel housing and connect the USB cable.
After logging to the panel from the PC, the box tamper is isolated
automatically and the box tamper timer is stopped.
1.4.1 Panel lid time
1 Panel lid time
>01'00<
The Panel lid timer defines for how long the panel lid is bypassed.
1.4.2 Restore lid
2>Restore lid
Yes
Enter the Restore lid menu to bypass the panel lid. The panel lid tamper timer
starts timing.
If the panel lid is already bypassed, entering this menu unbypasses it.
140 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual