Interlogix ATSx500A Series Installation And Programming Manual page 43

Maximum user number (for users with
SMS and voice reporting functionality)
User groups
Inhibit / isolate / shunt limit, max.
Schedules
Time frames
Special days
Actions per schedule
Event log capacity
Note: See also "Events" on page 79.
Data retention (log, program settings)
Access control features
Door controllers supported
Standard doors
Intelligent doors
Regions
Door groups
Maximum user number (with door
controllers connected)
Note: SMS and voice reporting features are only available for a limited user number. Maximum
number of users with full control and reporting functionality is given in "General features" on
page 36.
Ethernet connection (IP only)
Supported standard
Speed
Duplex
Cabling
Autonegotiation
Standard onboard outputs
S1, S2, S3
S4, S5 [1]
[1] Maximum cable length for low current output connection may not exceed 30 m. For longer
distances, use relay output expansion (for example, ATS624 four-relay expander).
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
50
16
32
4 per schedule
15500, which includes:
- 1000 mandatory events
- 1500 non-mandatory events
- 10000 access events
- 1000 installer events
- 1000 dialler events
- 1000 extended events
ATS1500A(-IP) ATS3500A(-IP)
7
4
28
17488 (with ATS1831 IUM installed)
64532 (with ATS1832 IUM installed)
IEEE 802.3u
10BASE-T or 100BASE-TX
Half-duplex and full-duplex
FTP (foiled twisted pair) Cat 5e cable or better
MDIX
High current electronic output, rating: 1 A at 13.8 V
Low current electronic output, rating: 50 mA at 13.8 V
Chapter 2: Installation
200 1000
64 128
128 512
24
8
20
20 years
ATS4500A-IP
12 12
8 16
48 48
256
128
2000
37