Chapter 5: Menu reference
•
Searching: Searching for the network to register
•
Reg. denied: Registration to the network has been denied
•
Unknown: Registration state is unknown
•
Roaming: Registered to a network in roaming
1.2.8.4 GPRS net.reg.
4>GPRS net.reg.
Home network
The GPRS network registration state can have the same values as described in
"1.2.8.3 GSM net.reg." on page 133.
1.2.8.5 GPRS state
5>GPRS net.reg.
Home network
The GPRS network state can be one of the following:
•
Not available: GPRS functionality is not available.
•
No network: GPRS functionality is available, but no network is present (for
example, SIM card is absent).
•
Not established: GPRS functionality is available, but connection is not
established (IP parameters are not assigned).
•
Configured: GPRS functionality is available and connection is established.
•
Stopped: GPRS functionality is available, but connection is stopped due to
the disconnection time expiration. See "9.3.n.7.8 Disconn.time" on page 280
for more details.
•
No data: Unknown error.
1.2.8.6 Network name
6>Network name
MyGSM
Network name is the name of the GSM network that the GSM dialler is currently
registered in. This is read-only information. The name can be "unknown", if the
network code is not recognized by the communication module.
1.2.8.7 Network code
7>Network code
The network code is the unique identification number of the GSM network in
which the GSM dialler is currently registered.
1.2.8.8 RSSI
8>RSSI
23 [IIII ]
The Received Signal Strength Indication (RSSI) value is read-only diagnostic
information.
134
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual