Interlogix ATSx500A Series Installation And Programming Manual page 200

Chapter 5: Menu reference
4.5.n.3 Pics by filter
1>Filter 1
>>>
Additionally to the zones listed in "4.5.n.2 Pics by zone" on page 193, there can
be up to two condition filters that also trigger the camera.
4.5.n.3.m Select filter
1>Filter 1
Not used
Select one of two filters to configure.
4.5.n.3.m.1 Choose filter
00>Not used
01 Internal sire
Choose a filter that activates the selected camera.
4.5.n.3.m.2 Event type <n>
2 Event type 1
>Burglar<
Define a type of the condition filter chosen in "4.5.n.3.m Select filter" above.
The available filter types are listed in "Camera event types" on page 98.
4.5.n.3.m.3 Report as
3 Report as
>Not used<
If the filter has a custom type, it is necessary to assign a reporting event, which
occurs when the filter becomes active.
Notes
• After you leave this menu, the event is shown as a reporting code in SIA
format. See Appendix B "Advisor Advanced reporting codes" on page 327 for
details.
• Only particular reporting events are available.
4.5.n.4 Pics by rep ev
1>Rep. event 1
Not used
The camera can be also triggered by a selected reporting event.
4.5.n.4.m Select event
1 Rep. event 1
>Not used<
Select one of two reporting events to configure.
194 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual