Interlogix ATSx500A Series Installation And Programming Manual page 141

The following ranges are available.
Table 24: RSSI ranges
RSSI Signal level
0 <−112 dBm
1 to 7 −111 to −99 dBm
8 to 12 −97 to −89 dBm
13 to 20 −87 to −73 dBm
21 to 26 −71 to −61 dBm
27 to 31 >−60 dBm
For accurate data transfer, we recommend a RSSI value above 16.
1.2.8.9 Msg sent 24h
1>All SMSes
0
The Msg sent 24h menu lists the SMS messages sent since midnight (00:00).
The following submenus are available.
• 1 All SMSes: All messages.
• 2 Report SMSes: Reporting messages.
• 3 Unknown SMSes: User SMS control messages that were not recognized
and therefore forwarded to the Supervisor.
Note:
This counter works only if the SMS forwarding is enabled. See
"9.3.n.6.2 SMS forwarding" on page 278.
1.2.8.10 Battery status
10>Battery stat.
OK
The informational screen shows the GSM module battery status.
Battery status should be OK. If the battery is faulty or missing, the battery status
is Fail.
1.2.9 Battery test
1>Test options
2 Man. bat. test
This menu allows you to perform a manual battery test as well as configure an
automatic test for batteries in the panel or an expander.
Notes
• This functionality is available only in specific devices, for example, ATS120xE
expanders.
• Battery test works only if there is no mains fault present.
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Bar indicator Description
No signal
[ ]
Insufficient signal
[I ]
Mediocre signal
[II ]
Good signal
[III ]
Excellent signal
[IIII ]
Excellent signal
[IIIII]
Chapter 5: Menu reference
135