Interlogix ATSx500A Series Installation And Programming Manual page 292

Chapter 5: Menu reference
9.4.1.n.4.2 Destination port
2 Dest port
> <
The Destination port defines which IP port is used to establish the selected PC
connection.
9.4.1.n.4.3 Ping host
Pinging...
Tx/Rx: 2/2
The Ping host command allows you to send a ping to the selected PC. This
command is used to check if the PC is present and accessible from the panel in
the network.
The Tx/Rx value indicates a number of packets sent and received.
GSM specific options
9.4.1.n.3 Conn. type
3 Conn. type
>CSD<
The Connection type menu defines what GSM connection is used. The following
options are available:
• CSD: The modem functionality is used.
• GPRS: The GPRS functionality is used.
286 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual