Interlogix ATSx500A Series Installation And Programming Manual page 211

5.1.n.3.5.1 Card and PIN
1>Reader In
No
Specify what method is required to open the door from the selected reader.
• Yes: Unlock the door by presenting a valid card to the reader and entering a
PIN on the reader's keypad.
• No: Unlock the door by presenting a valid card to the reader or a valid PIN on
the reader's keypad.
The option is configured separately for each door reader. After selecting the
option, choose the appropriate reader, and then set the option value.
5.1.n.3.5.2 Two cards
1>Reader In
No
Defines if two user cards or PINs are required to gain access. If set to yes, two
different users need to present their card and/or PIN within the programmed time
for the door to unlock.
The time is set in "8.5.1.2 Two cards" on page 246.
The option is configured separately for each door reader. After selecting the
option, choose the appropriate reader, and then set the option value.
5.1.n.3.5.3 NoSchedule req
1>Reader Out
No
This option extends the exit access for the selected OUT reader.
• Yes: The user has an access to the door from the OUT reader side even if his
schedule has already expired. But he must have assigned any schedule for
the door in his door group — users without schedule do not have an access
to the door.
• No: Valid schedule is required for the user to exit.
The option is configured separately for each door OUT reader. After selecting the
option, choose the appropriate reader, and then set the option value.
5.1.n.3.5.4 Card format
4 Card format
>Wiegand 27 bit<
Set the data format of the reader and card, key or token being used.
• Wiegand 27 bit
• 27-bit Tecom ASP
• K 32 bit
• Wiegand 26 bit (ID=16, FC=8)
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Chapter 5: Menu reference
205