Interlogix ATSx500A Series Installation And Programming Manual page 237

7.2.n.6.m.2 Start time
1 Start time
>00:00<
Provide the time of the day in 24-hour HH:MM format when the selected special
day time frame starts.
7.2.n.6.m.3 End time
1 Start time
>00:00<
Provide the time of the day in 24-hour HH:MM format when the selected special
day time frame ends.
7.2.n.6.m.4 Delete special day
To remove a special day, select a special day using the cursor, or by entering the
special day number, and go to the Delete special day menu.
The display shows:
5 Delete sp day
>Cancel<
Choose Ok and press Enter. This removes the special day.
Repeat the command to delete other special days, or press Clear to exit and
return to the higher menu level.
7.2.n.7 Filter
00>Not used
01 Internal Sire
Assign an additional condition filter to the schedule.
If this filter is deactivated, the schedule is disabled. If no condition filter is
assigned, the schedule is executed unconditionally.
See "6.1 Condition filters" on page 217 for more details.
7.2.n.8 Delete schedule
To remove a schedule, select a schedule using the cursor, or by entering the
schedule number, and go to the Delete schedule menu.
The display shows:
8 Delete sched
>Cancel<
Choose Ok and press Enter. This removes the schedule.
Repeat the command to delete other schedules, or press Clear to exit and return
to the higher menu level.
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Chapter 5: Menu reference
231