Interlogix ATSx500A Series Installation And Programming Manual page 153

Note:
If the keypad is configured as a reader, using this option is not allowed and
causes a warning:
WARNING
Check door conf
In this case program this option using menu "5.1 Doors > 5.1.n.6.3.4.3 EE PIN
lock" on page 201 instead.
2.2.1.n.3.9 Isolate keypad
9 Isolate Rkp
>No<
Use the Isolate keypad option to isolate the tamper fault events on the selected
keypad. The keypad, however, remains functional.
2.2.1.n.3.10 Buzzer silent
10 Buzzer silent
>Never<
It is possible to disable the keypad buzzer for particular events. The following
options are available:
• Never: Buzzer operates normally. It is impossible to mute the buzzer using
X + Left volume control.
• During PS exit: Buzzer does not sound when part setting. The manual volume
control is available without limitations.
• Always: Buzzer is disabled. The manual volume control is available without
limitations.
• During E/E: Buzzer remains silent during entry and exit time.
2.2.1.n.3.11 Quick set
11 Quick set
>Off<
The Quick set option allows setting areas without providing user PIN or card. If
this functionality is on, the premises are set after pressing On without user
authorization.
The following options are available:
• Off: Quick set is disabled
• Without list: All areas assigned to the keypad are set after pressing On
• With list: After On is pressed, the system prompts to choose areas from those
assigned to the keypad.
This option affects part setting as well.
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Chapter 5: Menu reference
147