Interlogix ATSx500A Series Installation And Programming Manual page 201

Choose an event that activates the selected camera.
Notes
• After you leave this menu, the event is shown as a reporting code in SIA
format. See Appendix B "Advisor Advanced reporting codes" on page 327 for
details.
• Only particular reporting events are available.
4.5.n.5 Isolated
5 Isolated
>No<
When the camera is isolated, it does not take pictures. Also, pictures cannot be
sent to the panel.
4.5.n.6 Max pics 24h
6 Max pics 24h
>Infinity<
Maximum picture number defines how many pictures can be taken by the
camera during 24 hours period of set or unset state.
The counter is reset when the area changes its set state.
The allowed range is 1 to 999, or 0 (infinity), which means unlimited number of
pictures.
If the limit is reached, the camera switches off and an appropriate event is
recorded in the log.
4.5.n.7 Remote pics
7 Remote pics
>Yes<
If remote picture triggering is enabled, you can take a picture remotely, using
configuration software.
4.5.n.8 Test pic to CS
1>CS 1
------------
The command allows you to take picture and send it to a selected central station.
Choose a central station to send the picture.
Calling CS 1...
Transmitting
The current picture transmission status is shown in the bottom line of the screen.
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Chapter 5: Menu reference
195