Interlogix ATSx500A Series Installation And Programming Manual page 329

Group Event
Low sec.inside
Low sec.outs.
Anti-passback
Door shunting
Shunt warning
D. Area armed
Keypad duress
DOTL
Forced
LED 1
LED 2
Buzzer
Group Event
Door Interlock
access
Intlck.overrid
Denied
Granted
Granted traced
Granted 1badge
Granted 2badge
Granted 3badge
Granted IN btn
Granted OUTbtn
Fire override
Normal
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
# Event description
12 Door low security
inside
13 Door low security
outside
14
15
16
17
18
19
20
21
22
23
# Event description
1
2
3
4
5
6
7
8
9
10
11
12
Appendix A: Advisor Advanced events
Notes
Card or PIN required to access
at the "IN" reader
Card or PIN required to access
at the "OUT" reader
Anti-Passback is active
Shunt timer is running
Shunt warning timer is running
Area assigned to the door is
armed. As a macro output, this
event disables a door when
"Deny access when set" is set to
Yes.
Duress PIN entered at door
keypad
Door contact is active after
shunt timer has expired
Door contact is active with no
valid door command
LED 1 output is active
LED 2 output is active
Door buzzer output is active
Notes
Interlock zones are active
Interlock has been overridden
Door access has not been
allowed
Door access has been allowed
Door access has been granted
to a user with trace On
Door access has been granted
when badged once
Door access has been granted
when badged twice
Door access has been granted
when badged three times
Door access has been granted
and IN button pressed
Door access has been granted
and OUT button pressed
Secondary override is active
The door is locked and closed.
323