Interlogix ATSx500A Series Installation And Programming Manual page 62

Chapter 3: System functions
Action Programmed method
Unset [2][3] Unset with PIN
Unset with card
Unset with card and PIN
Part set Part set with card
Door access [2] Door access with PIN
Door access with card
Door access with card and PIN
Duress [4] Duress with PIN
Duress with card and PIN
Panic [5] Panic alarm
[1] Use the check box to note which options are available for this system.
[2] The functionality depends on "2.2.1.n.3.7.1 Card&PIN mode" on page 145.
[3] The functionality depends on "8.7.7 Easy unset" on page 253.
[4] The functionality depends on "8.7.3 Duress method" on page 250.
[5] Panic alarm functionality depends on the "8.8.1 Panic mode" option described on page 254.
When a PIN can be entered, the keypad beeps twice and flashes the red and
green LEDs. When an operation fails the keypad beeps seven times.
56
Key sequence
Off, PIN, On
PIN
PIN, Off
Card
Off, card
Off, card, PIN, On
Card, PIN, Off
Card, PIN
Card
3 x card
Any digit, PIN, On
Card
Any digit, card
Any digit, card, PIN, On
Card, PIN, On
Any set key (On / Off), duress code,
Enter
Duress code, any set key
Any set key (On / Off), duress code,
card, Enter
Card, duress code, any set key
1 + 3
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
[1]


















