Interlogix ATSx500A Series Installation And Programming Manual page 347

Special day
Tamper
Trigger
Unset
Up/Download
User
User group
Virtual zone
Walk test
Wireless expander
Wireless PIR camera
Wireless PIR camera
expander
Zone
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
A date when alternative time frames in an active schedule are valid.
A situation where a zone, a keypad, control panel, expander or
associated wiring are tampered with, or accidentally damaged. The
Advisor Advanced tamper facility activates a signal when tamper
occurs.
Tamper alarms from zones are called zone tampers.
Triggers are system variables that can be used in condition filters to
control outputs remotely. Each trigger has 7 independent flags that
can be set or reset. The flags can be controlled by the various
means, for example: schedule, SMS command, keyfob, PC software.
The condition of an area when it is occupied and normal activity does
not set off an alarm.
A protocol providing means to view the status of an Advisor
Advanced system or change parameters in the system either local or
remote.
Anybody making use of the Advisor Advanced system. Users are
identified to the Advisor Advanced system by a unique number that is
associated with the user's PIN or card.
User groups define the options and permissions available to users.
A zone, which state depends on the state of a programmed output
rather than on an electrical signal on an input. Virtual zones are used
in advanced functionality programming.
A test performed by a user or installer. To pass the test, the user or
installer has to walk past detectors to activate these. The intention is
to test the functionality of the security system.
An expander that collects data from wireless sensors and fobs, and
transfers it to the control panel.
A wireless PIR detector with built-in digital camera, which can make
photos and send them to the control panel when particular zones
become active.
A wireless expander that collects data from wireless PIR cameras
and transfers it to the control panel.
An electrical signal from a security device or a group of devices (PIR
detector, door contact) to the Advisor Advanced system. Each device
is identified by a zone number or a name. For example, zone 14, Fire
Exit Door.
Glossary
341