Interlogix ATSx500A Series Installation And Programming Manual page 134

Chapter 5: Menu reference
1.2.5.2.5 Rkp/Exp tamper
5 Rkp/Exp tamper
>No<
If the Keypad/expander tamper option is set to Yes, the tamper alarms from
keypads and expanders assigned to this area also have to be tested.
1.2.5.2.6 Siren tamper
6 Siren tamper
>No<
If the Siren tamper option is set to Yes, the tamper alarms from sirens assigned
to this area also have to be tested.
1.2.5.2.7 Frequency
7 Frequency
>Never<
The Frequency setting defines, how often the user is requested to perform the
user walk test prior to setting an area. The following options are available:
• Never: User walk test is not requested
• Every set: User is asked to perform the walk test prior to each set
• 1st set of day: User is asked to perform the walk test prior to the first set each
day
• 1st set of week: User is asked to perform the walk test prior to the first set
each week
• 1st set of month: User is asked to perform the walk test prior to the first set
each month
Note:
For walk test purposes Advisor Advanced stores information on any zone
activation for 4 hours. Therefore if the zone was activated during the last 4 hours
before walk test, it is not included into the list of zones required to test. If each
walk test zone was activated during this time, the walk test is not requested.
1.2.5.2.8 Need to set
8 Need to set
>Off<
If Need to set option is set to On, the requested user walk test is obligatory. The
area cannot be set until the walk test is passed.
128 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual