Interlogix ATSx500A Series Installation And Programming Manual page 328

Appendix A: Advisor Advanced events
Group Event
ALARM
EXIT
NRTS
AREASET
AREAUNSET
Group Event
Schedule SCH ACTIVE
Group Event
Special SP DAY ACTIVE
day
Group Event
Reader OFFLINE
TAMPER
Table 32: Door controller events
Group Event
Door Door open
Door unlocked
Door locked
Door override
D.ovr.inhibit
Door disabled
Door enabled
Reader disabld
Reader enabled
2 card inside
2 card outside
322
# Event description
7 An alarm state
8 An exit state
9 Not ready to set
10 An area has been
set
11 An area has been
unset
# Event description
1 Schedule active
# Event description
1 Special day is
active
# Event description
1 Reader is offline
2 Reader tamper
# Event description
1
2
3
4
5 Door override
inhibit
6
7
8
9
10
11
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Notes
At least one area is in alarm
At least one area is in exit state
At least one area in area group
is in not Ready To Set state
Active for 3 s
Active for 3 s
Notes
Notes
Notes
Notes
Door open command is active
(to unlock / start shunt)
Unlock output is active to unlock
the door
Unlock output is deactivated to
lock the door
The low security schedule
assigned to the door is valid
The low security schedule is
inhibited
Door is disabled completely
(from keypad or computer)
Door reader is disabled
Door reader is enabled
Two Card access is required at
the "IN" reader
Two Card access is required at
the "OUT" reader