Interlogix ATSx500A Series Installation And Programming Manual page 132

Chapter 5: Menu reference
Choose the keypad and press Enter.
You can now:
• Switch all keypad LEDs to the on or off state using the Enter button.
• Exit keypad LED test. Press Clear to exit from test and restore the LED
states.
1.2.3.2 Trigger state
1>Trigger 1
2 Trigger 2
The trigger state menu allows you to manually change trigger flag states.
Choose the trigger and then choose the appropriate flag. Next, set the required
state.
1>SCHEDULE
Off
1.2.4 Panel status
1>View open ZN
2 Alarms
The Panel status menu provides an overview of all abnormal zone states, alarms
and faults present in the system.
Select the required state to view.
1.2.4.1 View open ZN
INFO
View open ZN
2>Front Door
Zone tamper
View abnormal zone states.
All items scroll automatically. Press Enter to exit.
1.2.4.2 Alarms
INFO
No alarms
View active alarms. Press Enter to exit.
1.2.4.3 Faults
INFO
No faults
View active system faults. Press Enter to exit.
126 Advisor Advanced ATSx500A(-IP) Installation and Programming Manual