9.1.n.2 Transm path
1>PSTN
4 IP
The transmission path defines the type of connection for reporting alarms to the
central station. Paths are defined in menu "9.3 Path options" on page 267.
9.1.n.3 Protocol
3 Protocol
>(X)SIA<
Choose the appropriate communication protocol.
Depending on the settings in "9.1.n.2 Transm path" above, the following
protocols can be available:
•
SIA
•
(X)SIA
•
VOICE
•
CID
•
OH+SIA
•
OH+XSIA
•
OH+CID
•
SMS TEXT
•
SMS+CID
•
SMS+SIA
•
SMS+XSIA
•
VOICE+SMS
•
SMS+MMS
•
OHPHOTO+CID
•
OHPHOTO+SIA
•
OHPHOTO+XSIA
•
PHOTO+XSIA
9.1.n.5 Accounts
1>Area 1
None
Account numbers identify alarm systems reporting to central stations. Account
numbers are 4 to 6 digits long (depending on the type of protocol). If set to None,
the reporting for the selected area is disabled.
Note:
When using voice reporting, account codes are used to identify if alarms
for an area should be reported. The account code is not transmitted.
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Chapter 5: Menu reference
259