Interlogix ATSx500A Series Installation And Programming Manual page 157

2.2.2.n.1 Expander type
1>Expander type
ATS1201
The expander type is an informational screen. The type is set by the expander.
2.2.2.n.2 Expander address
2>Exp address
BUS: 1 ADDR: 1
The expander address is an informational screen providing the DIP switch
address.
2.2.2.n.3 Expander range
3>Expander range
113-128
Expander range is an informational screen. It shows zone range available for this
expander.
Note: In case of 32-zone devices there are two zone ranges.
3>Expander range
113-128 353-368
See "2.2.2.n.4.6 Expander mode" on page 154 for more details.
2.2.2.n.4 Exp settings
4>Exp settings
>>>
The Expander settings menu contains menus shown below, which are necessary
to configure the selected expander.
Note:
The available settings depend on the expander type.
2.2.2.n.4.1 Expander name
1 Expander name
>Expander 1 <
Use the Expander name option to enter a name that identifies the expander to
the end-user.
When an expander is created, it is given the default name "Expander <n>",
where <n> is the expander address. Enter this menu to edit the current name.
An expander name can consist of 16 characters.
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Chapter 5: Menu reference
151