Interlogix ATSx500A Series Installation And Programming Manual page 269

9.1.n.11 Delete CS
To remove a central station, select a central station using the cursor, or by
entering the central station number, and go to the Delete central station menu.
The display shows:
10 Delete CS
>Cancel<
Choose Ok and press Enter. This removes the central station.
Repeat the command to delete other central stations, or press Clear to exit and
return to the higher menu level.
Note: You cannot delete a central station unless your user group authorizes you
to do so.
PSTN and ISDN specific options
9.1.n.4 Phone
4 Phone
> <
Every central station reports to one telephone number. The phone number can
contain up to 20 digits. The following special characters are available:
• P: Pause (3 s).
• T: Waiting for dial tone.
Note: To enter a character, press the corresponding key twice.
IP and GSM/GPRS specific options
9.1.n.4 Destination/IP
1>Type
Phone
The Destination menu contains the configuration of the reporting receiver.
9.1.n.4.1 Dest name
1 Dest name
> <
Every central station reports to one IP address.
A destination name can be a numeric IP address or an alphabetic domain
address. See also "How to edit a host address" on page 111.
Advisor Advanced ATSx500A(-IP) Installation and Programming Manual
Chapter 5: Menu reference
263