System And Port Leds; Port Leds; Table 8: System And Port Status Leds; Table 9: Port Leds - Alcatel-Lucent 7210 Installation Manual

Hardware Description

System and Port LEDs

Table 8: System and Port Status LEDs

LED
Critical
Major
Fan
Status

Port LEDs

The port LEDs are described in

Table 9: Port LEDs

SFP ports 1–24
XFP ports 25, 26
See Figure 9
descriptions.
Page 30
Condition
Red Indicates the presence of a new critical alarm.
Amber Indicates the presence of a new major alarm.
Off Indicates that the fans are functioning properly.
Red Indicates that one or more of the fans has failed, or that the fan
tray is not connected.
Note: The LED blinks shortly during the boot process.
Green The system has completed boot phase and is running normally.
Note: The status LED turns amber and blinks on power source
failure.
Table
LED
Green
Flashing Green
Off
Green
Flashing Green
Off
for an illustration of two ports and their corresponding LEDs. See
9.
Condition
Port has a valid link.
Flashing indicates activity on the port.
The link is down.
Port has a valid link.
Flashing indicates activity on the port.
The link is down.
7210 SAS-M Installation Guide
Status
Status
Table 11 key