Figure 5-30 Gvrp Configuration Instance - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide

Figure 5-30 GVRP Configuration Instance

l
Configuration Procedure
1. Configuration of switch A:
zte(cfg)#set garp enable
zte(cfg)#set gvrp enable
zte(cfg)#set gvrp port 1 enable
zte(cfg)#set vlan 10-20 enable
zte(cfg)#set vlan 10-20 add port 1
2. Configuration of switch B:
zte(cfg)#set garp enable
zte(cfg)#set gvrp enable
zte(cfg)#set gvrp port 1 enable
zte(cfg)#set vlan 30-40 enable
zte(cfg)#set vlan 30-40 add port 1
1. The GARP function must be enabled first before the GVRP function is enabled.
2. Enabling GVRP can enable up to 512 vlans.
3. Timer of Garp uses the default value. If it is modified, the value must be the same
as the one configured in the network.
4. Gvrp port registration type uses default Normal value. If it is modified to other
types, vlan learning cannot be implemented.
l
Configuration Verification
SwitchA(cfg)#show garp
GARP is enabled!
GARP Timers:
Hold Timeout
Join Timeout
Leave Timeout
LeaveAll Timeout
SwitchA(cfg)#show gvrp
GVRP is enabled!
PortId
------
1
SwitchA(cfg)#show port 1 vlan
PortId
SJ-20130731155059-002|2013-11-27 (R1.0)
Note:
/*View GARP configuration*/
:100 milliseconds
:200 milliseconds
:600 milliseconds
:10000 milliseconds
/*View GV RP configuration*/
Status Registration
-------- ------------
Enabled Normal
: 1
LastPduOrigin
-----------------
00.d0.d0.f2.51.24
5-94
ZTE Proprietary and Confidential