Zte ZXR10 2900E series Configuration Manual page 140

ZXR10 2900E Series Configuration Guide
Command
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
zte(cfg)#
show ntp (all configuration modes)
NTP Configuration Instance
l
Configuration Description
Suppose that the switch and NTP server 1 (IP address is 202.10.10.10) and NTP
server 2 (IP address is 201.10.10.10) implement time synchronization. Make sure
that the switch and NTP server can ping each other successfully. The NTP module is
configured as follows:
l
Configuration Procedure
zte(cfg)#set ntp server 202.10.10.10
zte(cfg)#set ntp second-server 201.10.10.10
zte(cfg)#set ntp enable
l
Configuration Verification
zte(cfg)#show ntp
ntp protocol is enable
ntp server address
ntp source address
ntp source udp port
ntp is_synchronized for second server
ntp rcv stratum
no reference clock.
ntp time zone
In the displayed information, "ntp is_synchronized for second server" means the
current switch time is synchronized with that of the server 2.
SJ-20130731155059-002|2013-11-27 (R1.0)
set ntp source <A.B.C.D>
set ntp clock-period <5-2147483647>
set ntp timezone <(-12)-(+13)>
set ntp {enable | disable}
set ntp src-udp-port {123 | 1000}
: 202.10.10.10
: None
: 1000
: 16
: 0
: Yes
5-92
ZTE Proprietary and Confidential
Function
Sets the source IP address that is
used for the switch to send NTP
packets.
Sets the period of NTP
synchronization.
Sets NTP time-zone.
Enables or disables NTP.
Sets the ID of the udp port through
which NTP messages are sent.
Displays NTP configuration.