Zte ZXR10 2900E series Configuration Manual page 77

Command
zte(cfg-nas)#
zte(cfg-nas)#
zte(cfg-nas)#
zte(cfg-nas)#
<1-1023>]
zte(cfg-nas)#
<1-65535>| duration <2-65535>| blackout<2-65535>}
zte(cfg-nas)#
zte(cfg-nas)#
remove | pause | resume}
zte(cfg-nas)#
{package | channel}
zte(cfg-nas)#
{name <package-name>| id-list <package-list>}
zte(cfg-nas)#
{name <channel-name>| id-list <channel-list>}{deny | order |
preview | query}
zte(cfg-nas)#
disable}
zte(cfg-nas)#
{enable | disable}
zte(cfg-nas)#
uvlan <1-4094>
zte(cfg-nas)#
<channel-list>| all}
zte(cfg-nas)#
< package-idlist >| all}
zte(cfg-nas)#
id-list <viewfile-lis>| all}
zte(cfg-nas)#
{name <package-name>| id-llist <package-idlist>}
SJ-20130731155059-002|2013-11-27 (R1.0)
iptv prv autoreset-time <HH:MM:SS>
iptv prv recognition-time <1-65534>
iptv prv overcount-cdr {enable | disable}
iptv view-profile name < viewfile-name>[id
iptv view-profile name <viewfile-name>{count
iptv cac-rule {enable | disable}
iptv port <portlist>[vlan <1-4094>] service {start |
iptv port <portlist>[vlan <1-4094>] control-mode
iptv port <portlist>[vlan <1-4094>] package
iptv port <portlist>[vlan <1-4094>] channel
iptv port <portlist>[vlan <1-4094>] cdr {enable |
iptv port <portlist>[vlan <1-4094>] mac-base
iptv port <portlist>{add|delete} mvlan <1-4094>
clear iptv channel {name <channel-name>| id-list
clear iptv package {name <package-name>| id-list
clear iptv view-profile{name <viewfile-name>|
clear iptv port <portlist>[vlan <1-4094>] package
Chapter 5 Service Configuration
5-29
ZTE Proprietary and Confidential
Function
Automatically resets the preview
function.
Sets recognition time. A short time
preview is not counted.
Enables or disables the IPTV
preview overcount-cdr function.
Creates IPTV preview
configuration files.
Creates IPTV preview
configuration files.
Enables or disables the CAC
control.
Sets user service state.
Sets user multicast control mode.
Allocates packages for the user.
Allocates the access permission of
the channel for the user.
Enables or disables the user CDR
log record function.
Enables or disables the
management mode based on
the MAC address.
Adds or deletes a duplicate rule.
Deletes a channel.
Deletes a package.
Deletes a preview configuration
file.
Deletes the package allocated for
users.