Figure 5-15 Pvlan Configuration Example 2 - Zte ZXR10 2900E series Configuration Manual

ZXR10 2900E Series Configuration Guide
isolate-trunks
community-ports
community-trunks :
PVLAN Configuration Example Two
l
Configuration Description
Add a trunk 1 and isolated ports 4, 5 and 6 into session 2. See

Figure 5-15 PVLAN Configuration Example 2

l
Configuration Procedure
1. Configuration of switch A:
zte(cfg)#set lacp enable
zte(cfg)#set lacp aggregator 1 add port 1-3
zte(cfg)#set lacp sggregator 1 mode dynamic
2. Configuration of switch B:
zte(cfg)#set lacp enable
zte(cfg)#set lacp aggregator 1 add port 1-3
zte(cfg)#set lacp aggregator 1 mode dynamic
zte(cfg)#set vlan pvlan session 2 promis-trunk 1 isolate-port 4-6
l
Configuration Verification
zte(cfg)#show vlan pvlan
pvlan session
promis-ports
promis-trunks
isolate-ports
isolate-trunks
SJ-20130731155059-002|2013-11-27 (R1.0)
:
:
: 1
: 16
:
: 1-3
:
5-62
Figure 5-15.
ZTE Proprietary and Confidential